For years there seemed to be a single efficient path to keep data on your personal computer – employing a disk drive (HDD). Nevertheless, this sort of technology is actually showing its age – hard disk drives are really loud and slow; they can be power–ravenous and frequently produce a great deal of heat in the course of intensive procedures.

SSD drives, alternatively, are extremely fast, use up a lesser amount of energy and are generally far less hot. They furnish a completely new strategy to file accessibility and storage and are years ahead of HDDs regarding file read/write speed, I/O performance and energy efficacy. See how HDDs fare against the newer SSD drives.

1. Access Time

Image

SSD drives present a completely new & progressive solution to file safe–keeping according to the utilization of electronic interfaces in lieu of any sort of moving parts and rotating disks. This new technology is faster, making it possible for a 0.1 millisecond data file access time.

Image

The concept driving HDD drives goes all the way to 1954. And although it’s been substantially refined through the years, it’s nevertheless can’t stand up to the revolutionary concept powering SSD drives. Having today’s HDD drives, the very best data file access speed it is possible to reach may differ somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

Image

The random I/O performance is critical for the performance of a file storage device. We have run thorough trials and have confirmed that an SSD can handle a minimum of 6000 IO’s per second.

Image

With an HDD drive, the I/O performance steadily increases the more you employ the hard drive. Nonetheless, once it reaches a particular restriction, it can’t get speedier. And due to the now–old concept, that I/O limit is a lot below what you could have with an SSD.

HDD are only able to go as much as 400 IO’s per second.

3. Reliability

Image

SSD drives do not have virtually any rotating components, which means that there’s much less machinery within them. And the fewer physically moving elements you’ll find, the fewer the likelihood of failure will be.

The regular rate of failure of any SSD drive is 0.5%.

Image

HDD drives work with rotating hard disks for storing and browsing info – a technology since the 1950s. With hard disks magnetically hanging in mid–air, rotating at 7200 rpm, the probability of anything going wrong are generally higher.

The normal rate of failure of HDD drives ranges between 2% and 5%.

4. Energy Conservation

Image

SSDs are lacking moving components and require hardly any cooling down power. Additionally they need very little energy to function – lab tests have shown they can be powered by a regular AA battery.

In general, SSDs take in somewhere between 2 and 5 watts.

Image

From the minute they were constructed, HDDs have been extremely electric power–heavy devices. Then when you have a server with numerous HDD drives, it will boost the month–to–month electricity bill.

Normally, HDDs take in between 6 and 15 watts.

5. CPU Power

Image

The quicker the data access rate is, the quicker the file queries are going to be treated. It means that the CPU won’t have to hold assets expecting the SSD to answer back.

The common I/O delay for SSD drives is merely 1%.

Image

HDD drives permit reduced accessibility rates compared with SSDs do, which will result for the CPU having to hang around, while scheduling assets for your HDD to locate and give back the requested data.

The average I/O delay for HDD drives is just about 7%.

6.Input/Output Request Times

Image

The vast majority of Studio Presence (Rups)’s brand new web servers now use merely SSD drives. Our own tests have revealed that with an SSD, the normal service time for an I/O request although running a backup remains under 20 ms.

Image

Throughout the very same trials with the exact same hosting server, this time around equipped out using HDDs, overall performance was much reduced. Throughout the hosting server backup procedure, the standard service time for any I/O requests ranged somewhere between 400 and 500 ms.

7. Backup Rates

Image

Referring to backups and SSDs – we’ve detected an amazing progress in the back up rate as we turned to SSDs. Today, a typical server backup will take merely 6 hours.

Image

Through the years, we’ve got worked with principally HDD drives with our servers and we are familiar with their functionality. On a web server furnished with HDD drives, an entire server backup often takes about 20 to 24 hours.

Our Linux cloud web hosting accounts offer SSD drives automatically. Be a part of our family here, at Studio Presence (Rups), to see the way we can assist you to help your site.


  • Service guarantees

  •  
  • Register now. There won’t be any configuration costs and you will have complete SSH/full root access to your server. 99.9% network availability is warranted.
  • Compare our prices

  •  
  • Have a look at our pricing and choose the right Virtual Private Server for your dynamic sites. It is easy to upgrade to a more advanced VPS Hosting configuration with just a mouse click.
  • Compare our hosting plans
  • Contact Us

  •  
  • It is easy to get in touch with us day and night by email or by using our super–fast ticketing system. Studio Presence (Rups) provides a 1–hour reply–back time warranty.